Hexagon base and tops
Central table bases Hexagon
Our range includes metal bases on a central leg finished in black paint. The bases are offered in two heights – dining and bar. To complement them, it is possible to order table tops in the specified dimensions. The table top is attached to the central base by a screw in an insert nut. The base is fitted with adjustable leveling screws, which eliminate unevenness of the floor. ! If you use table tops for a table base that is not in our range, we are not responsible for potential overturning of the table.
|
Table tops Hexagon
M – the basic material is a solid wood top consisting of wooden prisms glued together (piedroit). Colour differences must be considered for solid wood piedroit, as individual glued prisms may react differently to the finishing materials. Dimension tolerance of ± 3 mm is defined for solid wood table tops, since wood as a natural material naturally reacts to the ambient environment. The natural reactions may also include spontaneous sag of the table top. Table tops with the size above 50 cm are therefore supplied with a reinforcement on the bottom side. Y – the basic material is a multiplex board laminated with high-pressure laminate (HPL) with thickness of 0.8 mm. The multiplex consists of layers of veneer applied crosswise onto each other, glued and pressed similarly to plywood. The multiplex is distinguished by a greater thickness of the internal veneers, thus the properties of these pressed boards approach solid wood.
|